
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X75BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 75mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X75BT is a double-acting JIS compact cylinder engineered for substantial thrust within a minimal axial footprint. It generates 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, utilizing a 25 mm piston rod. The integrated C-clip and riveted body design drastically reduces overall length compared to traditional round-body options, making it ideal for machinery where mounting depth is restricted.
This specific configuration includes a male-thread piston rod end (M22x1.5) for direct, secure coupling to your tooling. Deceleration at the stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-energy cycles may require an external shock absorber. The body retains magnetic-switch grooves, though this unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X75BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives heavy plastic part ejection plates where the short 75 mm stroke and 2513.2 N thrust efficiently strip components from mold cavities without requiring deep machine clearances.
Pushes corrugated box flaps during high-speed case erecting, utilizing the fixed NBR bumper to absorb the impact of rapid 30-500 mm/s cycling without external cushioning.
Advances heavy metal strip material into a mechanical press, using the male M22x1.5 rod thread to securely attach a heavy-duty feed gripper block.
When sizing this 80 mm bore model, consider stepping down to the 63 mm variant if your application requires less force, as it provides 1558.6 N of push at 0.5 MPa. Conversely, if you need greater thrust, the 100 mm bore offers 3927.0 N at the same pressure. Ensure your ordering essentials match this exact specification: an 80 mm bore, 75 mm stroke, NPT3/8 port, and the male M22x1.5 rod thread.
Keep in mind that a standard ACQ body does not hold its position if air pressure is lost or the directional valve is centered; the piston will drift. If your setup demands fail-safe load holding, you must integrate an external rod lock or a pilot-operated check valve into the pneumatic circuit.
Quick checklist
This 80 mm bore cylinder delivers a push force of 2513.2 N and a pull force of 2267.8 N at 0.5 MPa. At 0.7 MPa, the push force is 3518.5 N, with a maximum push capacity of 513 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles temperatures from -20 to +70 C, and runs at speeds of 30-500 mm/s.
No, it uses fixed NBR elastomer bumpers at both ends to decelerate the piston, which are not field-adjustable; high-energy applications may need external shock absorbers. Additionally, it does not hold its load on air loss—the rod drifts—so an external rod lock is required for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.