
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X75ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 75mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X75ST is a double-acting, single-rod JIS compact cylinder engineered to deliver substantial force in a minimal axial footprint. Utilizing a riveted piston-to-rod connection and C-clip assembly, this 80 mm bore unit generates 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa. It operates on filtered air at 30-500 mm/s and features a NPT3/8 port.
This specific model includes a built-in piston magnet (-S) for position detection, accepting either reed or electronic switches along its body grooves. End-of-stroke energy is managed by a fixed NBR elastomer bumper rather than an adjustable cushion, meaning high-speed operations may require an external shock absorber to prevent impact damage. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X75ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 2513.2 N push force required to eject dense plastic components from injection molding tools, fitting neatly into tight mold voids.
Acts as a compact press ram for light-duty sheet metal bending stations, utilizing its 75 mm stroke to form brackets and enclosures.
Functions as a heavy-duty stopper arm on high-mass pallet conveyor lines, using the integrated magnet to confirm blocking position to the PLC.
Selecting this 80 mm bore involves sizing against adjacent options: stepping down to a 63 mm bore drops the 0.5 MPa push to 1558.6 N, while stepping up to a 100 mm bore increases it to 3927.0 N. The ACQ80X75ST configuration specifies an 80 mm bore, 75 mm stroke, NPT3/8 porting, a female M16x2.0 rod end, and the integrated magnet. Keep in mind this cylinder does not hold its position if air pressure is lost; the rod will drift, so a pilot-operated check valve or external rod lock is necessary for fail-safe load holding.
Quick checklist
At 0.5 MPa, this 80 mm bore cylinder provides 2513.2 N of push force and 2267.8 N of pull force. At 0.7 MPa, the push force reaches 3518.5 N. The maximum push force is 513 kgf at the 1.0 MPa operating pressure limit.
It relies on a fixed NBR elastomer bumper at each end to absorb the stop energy, which is not an adjustable air cushion or a braking lock. If air is lost, the cylinder cannot hold its load and will drift; a separate rod lock or pilot-operated check valve is required for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.