
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X75T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 75mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X75T is a double-acting JIS compact cylinder engineered to deliver substantial force within a minimal axial footprint. Utilizing a riveted piston-to-rod connection and a C-clip secured body, it achieves a shorter overall depth than conventional round-body alternatives. At 0.5 MPa, this 80 mm bore unit generates 2513.2 N of push force and 2267.8 N of pull force, operating efficiently at speeds between 30-500 mm/s.
This specific configuration features a 75 mm stroke, a 25 mm piston rod, and a NPT3/8 port. Instead of an adjustable air cushion, it relies on fixed NBR elastomer bumpers at both ends to absorb end-stop impact. The body includes integrated magnetic-switch grooves, though this particular model ships without the internal magnet. A female M16x2.0 rod-end thread provides a secure load coupling. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X75T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the robust 2513.2 N push force needed to eject dense plastic parts from injection molding machines, utilizing the compact body to fit within tight mold platen areas.
Drives secondary stamping or marking operations on thick metal sheets where a 75 mm stroke and NBR bumpers reliably absorb the substantial end-stop kinetic energy.
Lifts heavy industrial pallets vertically in automated packaging lines, taking advantage of the 25 mm rod diameter to handle significant off-center loads during elevation.
Selecting the ACQ80X75T is appropriate when your application requires roughly 2513.2 N of extension force at 0.5 MPa. If you need slightly less power, the adjacent 63 mm bore offers 1558.6 N of push, while stepping up to the 100 mm bore yields 3927.0 N. Keep in mind that a standard ACQ body does not hold its position if air pressure drops or the valve is centered; the piston will drift, and the fixed NBR bumper only decelerates the rod near the stroke end. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
When requesting a quote, verify this model's core attributes: an 80 mm bore, a 75 mm stroke, a female M16x2.0 rod thread, and a NPT3/8 port. Because this unit lacks the internal magnet, position sensing is not possible without modifying the build to include an -S option.
Quick checklist
The ACQ80X75T generates a push force of 2513.2 N and a pull force of 2267.8 N at 0.5 MPa. At 0.7 MPa, the push force is 3518.5 N, with a maximum push capacity of 513 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa, handles temperatures from -20 to +70 C, and has a speed range of 30-500 mm/s.
This model uses fixed NBR elastomer bumpers at both ends to absorb end-stop energy; it is not equipped with an adjustable air cushion. Additionally, a plain ACQ cylinder does not hold its load when air is lost or the valve is centered, as the piston will drift. For a fail-safe hold, you must install an external rod lock or a pilot-operated check valve.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.