verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACQ Series · JIS Compact Cylinder

Airtac ACQ Ultra Thin Air Cylinder ACQ80X80BT

The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X80BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 80mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.

  • BoreØ80 mm
  • Stroke80 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×2.0 (F) / M22×1.5 (B)
  • ConfigurationStandard compact
$121.26 $128.76Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACQ80 stroke, mounting and version on one page All ACQ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACQ Ultra Thin Air Cylinder ACQ80X80BT

The AirTAC ACQ80X80BT is a double-acting, single-rod JIS compact cylinder engineered to deliver 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa. Its short C-clip and riveted body design significantly reduces axial mounting depth compared to conventional round-body units, saving valuable machine footprint in tight assemblies.

This specific configuration includes a male-thread piston rod end (M22x1.5) for direct load coupling, alongside a NPT3/8 port. The bore interior is hard-anodized for longevity, and the piston relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac ACQ Ultra Thin Air Cylinder ACQ80X80BT Technical Specifications

ModelAirtac ACQ Ultra Thin Air Cylinder ACQ80X80BT
SeriesACQ JIS compact (thin) cylinder
Bore sizeØ80 mm
Stroke80 mm
Acting typeDouble acting
Port sizePT3/8
Rod end threadM16×2.0 female / M22×1.5 male (B)
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionBumper (both ends)
Max standard strokeUp to 100 mm

Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2513 N2268 N
0.7 MPa3519 N—
Max (@1.0 MPa)513 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac ACQ Ultra Thin Air Cylinder ACQ80X80BT

ACQJIS compact (thin) double-acting cylinder series.
80Bore size in mm.
×80Stroke length in mm.
SBuilt-in magnet for magnetic-switch position sensing (omit = no magnet).
BMale-thread piston rod (omit = female-thread rod).

Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).

Where the Airtac ACQ Ultra Thin Air Cylinder ACQ80X80BT Is Used

precision_manufacturing

Injection Mold Ejection

Provides 2513.2 N of extend force to push finished plastic parts out of an injection molding die within a compact machinery envelope.

conveyor_belt

Pallet Diverting Arm

Actuates a heavy-duty routing gate on a packaging conveyor, utilizing the 80 mm stroke and male M22x1.5 rod to directly pivot the diverter mechanism.

factory

Press Brake Tooling

Drives an auxiliary hold-down or alignment fixture on a metal press brake, where the fixed NBR bumper manages end-stop energy without needing adjustment.

Is the Airtac ACQ Ultra Thin Air Cylinder ACQ80X80BT the Right Cylinder?

When sizing this 80 mm bore model, note that stepping down to a 63 mm bore yields 1558.6 N push at 0.5 MPa, while stepping up to a 100 mm bore provides 3927.0 N. The ACQ80X80BT operates at 30-500 mm/s and uses a male M22x1.5 rod thread with a NPT3/8 port. To finalize your order, confirm the 80 mm bore, 80 mm stroke, male rod thread, and the absence of a sensor magnet.

Keep in mind that a standard ACQ body does not hold its position if air pressure drops or the valve is centered; the rod will drift. If your application requires fail-safe load holding on this 80 mm bore, you must integrate an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short-body depth vs. a round-body cylinder
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (S) for sensors?
  • ✓ Female (blank) or male (B) rod thread
  • ✓ Side load — avoid on a compact rod
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the short piston rod.
  • check Very long strokes are unsuitable for the compact body.
  • check Handle the C-clip carefully; seat it fully in its groove.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACQ Ultra Thin Air Cylinder ACQ80X80BT FAQ

The ACQ80X80BT generates 2513.2 N push and 2267.8 N pull at 0.5 MPa, 3518.5 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. Its operational speed range is 30-500 mm/s.

No. It uses a fixed NBR elastomer bumper at each end to decelerate the piston, which is not field-adjustable; for high energy loads, slow the approach or add an external shock absorber. Additionally, this specific model ships without a sensor magnet, though the body retains grooves for adding AirTAC reed or electronic switches if needed.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC ACQ Compact Cylinders

Request a Quote for Airtac ACQ Ultra Thin Air Cylinder ACQ80X80BT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACQ80X80BT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.