
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X80SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 80mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X80SBT is a double-acting JIS compact cylinder engineered for substantial thrust within a minimal axial envelope. It generates 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, utilizing an 80 mm stroke. The integrated C-clip and riveted piston-to-rod assembly significantly reduce overall length compared to traditional round-body units, saving valuable machine footprint.
This specific configuration includes a built-in piston magnet (-S) for position detection via AirTAC reed or electronic switches, and a male-thread piston rod end (-B, M22x1.5) for direct load coupling. The 80 mm bore uses a NPT3/8 port and relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact, which is not field-adjustable. Operating speed ranges from 30-500 mm/s. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X80SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the folding mechanism on heavy-duty packaging lines, utilizing 2513.2 N of extend force to square and seal large corrugated cartons.
Pushes finished plastic parts out of injection molding tools, where the male M22x1.5 rod end threads directly into the ejection plate.
Positions heavy-gauge metal sheets on a press brake before bending, relying on the 80 mm stroke to clear the upper die during loading.
When sizing this 80 mm bore model, consider stepping down to the 63 mm bore for 1558.6 N push at 0.5 MPa, or stepping up to the 100 mm bore for 3927.0 N push at 0.5 MPa. This ACQ80X80SBT configuration specifies an 80 mm stroke, a NPT3/8 port, the -S magnet for sensing, and the -B male M22x1.5 rod thread. Note that a standard double-acting cylinder drifts when air pressure is lost or a valve is centered; the fixed NBR bumper only decelerates the piston near stroke end and does not function as a locking brake. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
Quick checklist
The ACQ80X80SBT generates 2513.2 N push and 2267.8 N pull at 0.5 MPa, 3518.5 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. The maximum standard stroke for the 80 mm bore is 100 mm.
No, it uses fixed NBR elastomer bumpers at both ends to absorb impact. Because this is not an adjustable air cushion, you should slow the approach speed or add an external shock absorber for high-energy loads.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.