
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X80T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 80mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X80T is a double-acting, single-rod JIS compact cylinder engineered to deliver substantial thrust in a minimal axial footprint. It generates 2513.2 N of push force at 0.5 MPa and up to 3518.5 N at 0.7 MPa, utilizing a hard-anodized 80 mm bore for extended wear life.
This model features a 25 mm piston rod with a female M16x2.0 thread and a NPT3/8 port. The short C-clip and riveted body design drastically reduces overall length compared to round-body units, while the fixed NBR elastomer bumpers absorb end-stop impact. Note that this specific unit ships without a piston magnet, though the body retains standard switch grooves for future sensor integration. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X80T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust ejection force for heavy plastic injection molds, utilizing the 80 mm stroke to safely push finished parts out of the tool cavity.
Feeds heavy-gauge sheet metal blanks into a hydraulic forming press, where the compact body length saves critical floor space on the staging conveyor.
Folds top flaps on large corrugated pallet cartons, applying high push force to ensure secure glue adhesion before the case sealer.
When sizing this 80 mm bore, verify if the 2513.2 N push at 0.5 MPa suits your dynamic load; if you need less force, the adjacent 63 mm bore provides 1558.6 N, or you can step up to the 100 mm bore for 3927.0 N. Remember that a plain ACQ cylinder does not hold its position if air pressure drops or the valve is centered—the rod will drift, and the fixed NBR bumper only decelerates near the stroke end, so an external rod lock or pilot-operated check valve is required for fail-safe holding.
To order this exact configuration, confirm the 80 mm bore, 80 mm stroke, NPT3/8 port, default female M16x2.0 rod thread, and no magnet. Operating speed spans 30-500 mm/s within a 0.15-1.0 MPa pressure range.
Quick checklist
This 80 mm bore cylinder provides 2513.2 N push and 2267.8 N pull at 0.5 MPa, 3518.5 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. The standard stroke limit for this bore is 100 mm.
No, it uses fixed NBR elastomer bumpers at each end to absorb impact, not an adjustable air cushion. For high-speed or high-energy loads, you should slow the approach speed or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.