
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X90SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 90mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X90SBT is a double-acting JIS compact cylinder engineered to deliver a substantial 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa. Its short C-clip and riveted body architecture significantly reduces axial mounting depth compared to round-body alternatives, saving valuable machine footprint in tight assembly zones.
This specific configuration includes a built-in piston magnet (-S) for triggering AirTAC reed or electronic switches via the body's peripheral grooves, and a male M22x1.5 thread (-B) on the Ø25 mm rod for direct load coupling. Deceleration is handled by fixed NBR elastomer bumpers at each end, which are not adjustable, meaning high-speed operations may require external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X90SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives heavy mold separation or ejection arms in plastic injection machinery, utilizing the 2513.2 N extend force to break loose stubborn tooling segments.
Actuates heavy-duty routing gates on high-throughput packaging conveyors, where the 90 mm stroke quickly shunts loaded pallets onto secondary processing lanes.
Applies vertical clamping pressure on multi-layer wood laminating presses, taking advantage of the compact body depth to minimize the overall press height.
When sizing this 80 mm bore actuator, evaluate your force requirements against adjacent bores: stepping down to the 63 mm bore yields 1558.6 N of push at 0.5 MPa, while stepping up to the 100 mm bore provides 3927.0 N. The ACQ80X90SBT operates at 30-500 mm/s and uses a NPT3/8 port. Ensure your ordering essentials match this 80 mm bore, 90 mm stroke, male M22x1.5 rod end, and sensor magnet configuration.
Note that a standard ACQ body does not hold its position or load when air pressure is lost or the directional valve is centered; the piston will drift. If your application requires fail-safe load holding, you must integrate an external rod lock or a pilot-operated check valve into the pneumatic circuit.
Quick checklist
At 0.5 MPa, this double-acting cylinder provides 2513.2 N of push force and 2267.8 N of pull force. At 0.7 MPa, the push force reaches 3518.5 N, with a maximum push capacity of 513 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa and a speed range of 30-500 mm/s.
It uses fixed NBR elastomer bumpers at both ends to absorb the end stop; these are not field-adjustable like an air cushion, so you may need external shock absorbers for high-energy loads. For position feedback, the integrated magnet works with AirTAC reed or electronic switches mounted in the body grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.