
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X90ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 90mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X90ST is a double-acting, single-rod JIS compact cylinder engineered to deliver substantial thrust within a minimal axial footprint. Utilizing a riveted piston-to-rod connection and a C-clip secured body, it achieves a notably shorter overall length compared to conventional round-body options. At 80 mm bore, it provides 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa.
This unit includes a built-in piston magnet (-S) for position detection via AirTAC reed or electronic switches mounted in the body grooves. End-of-stroke energy is managed by a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-speed operations may require an external shock absorber to prevent impact damage. The 25 mm piston rod features a female M16x2.0 thread, and the body accepts NPT3/8 pneumatic piping. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X90ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 2513.2 N push force needed to eject heavy stamped metal panels from a press die within a short 90 mm travel distance.
Secures plastic injection mold halves with high pulling power, utilizing the compact body to fit within tight machine tooling envelopes.
Drives a heavy-duty diverter arm on a packaging conveyor, relying on the 25 mm rod to handle lateral loads during high-speed pallet routing.
Selecting this 80 mm bore model makes sense when your application requires over 2500 N of extension force at 0.5 MPa. If you need slightly less thrust, the 63 mm bore offers 1558.6 N of push at the same pressure, while stepping up to the 100 mm bore yields 3927.0 N. This 90 mm stroke sits just under the 100 mm maximum standard stroke limit for this bore size.
Keep in mind that a plain compact cylinder like the ACQ80X90ST will drift and cannot hold a load if air pressure is lost or the valve is centered; the fixed NBR bumper only decelerates the piston near the end of travel rather than locking it. For fail-safe positioning, an external rod lock or pilot-operated check valve is required. When ordering, confirm the 80 mm bore, 90 mm stroke, NPT3/8 port, female rod thread, and the required -S magnet for switch sensing.
Quick checklist
The 80 mm bore generates 2513.2 N push and 2267.8 N pull at 0.5 MPa, and 3518.5 N push at 0.7 MPa. The maximum push force is 513 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa with a speed range of 30-500 mm/s.
No, end-of-travel deceleration is handled by a fixed NBR elastomer bumper, not an adjustable air cushion. Additionally, the cylinder cannot hold a load if air pressure drops; you must add an external rod lock or pilot-operated check valve for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.