
The AirTAC ACQ140 Compact Cylinder ACQ140X10S is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø140mm bore and 10mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ140X10S is a double-acting, single-rod JIS compact cylinder engineered for heavy-duty operations within a minimal axial footprint. Utilizing a riveted piston-to-rod connection and C-clip assembly, this big-bore 140 mm variant generates 7696.9 N of push force and 7294.8 N of pull force at 0.5 MPa. It features a 32 mm piston rod and a PT3/8 port, making it highly capable for substantial pressing and lifting tasks.
Equipped with an S-option piston magnet, the body accommodates AirTAC reed or electronic switches along its full perimeter grooves for precise end-position detection. Instead of an adjustable air cushion, it relies on fixed NBR elastomer bumpers at both ends to absorb end-stop impact. Because this short 10 mm stroke operates at high energy, adding an external shock absorber is advised to protect the machinery.
| Model | Airtac ACQ140 Compact Cylinder ACQ140X10S |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø140 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M22×2.5 female / M30×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 7697 N | 7295 N |
| 0.7 MPa | 10776 N | — |
| Max (@1.0 MPa) | 1570 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 140 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the robust 7696.9 N extension force needed to knock heavy metal blanks from progressive stamping dies in a confined machinery footprint.
Applies steady pull force to break loose large molded plastic parts from core pins during automated demolding cycles.
Drives short-stroke vertical elevation platforms in end-of-line packaging, utilizing the 32 mm rod to lift substantial pallet loads.
When sizing this 140 mm bore model, stepping down to the Ø125 bore yields 6135.9 N push at 0.5 MPa, while stepping up to the Ø160 bore provides 10053.1 N push at 0.5 MPa, allowing you to scale force precisely. The ACQ140X10S configuration specifies a 10 mm stroke, a PT3/8 port, a female M22x2.5 rod-end thread, and the built-in S magnet for switch sensing.
Keep in mind that a standard compact cylinder cannot maintain its position if air pressure drops or the directional valve centers; the rod will drift, and the fixed NBR bumper only decelerates the piston near the stroke end without locking it. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
AirtacDistr lists every ACQ140 order code with its price on one page at https://airtacdistr.com/products/airtac-acq140-compact-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 7696.9 N and the pull force is 7294.8 N. At 0.7 MPa, the push force is 10775.7 N. The maximum push force is 1570 kgf at 1.0 MPa. Operating pressure ranges from 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
It uses fixed NBR elastomer bumpers at both ends rather than an adjustable air cushion, so slowing the approach or adding external shock absorbers is recommended for high-energy stops. It does not hold its load if air is lost; the rod drifts, requiring an external rod lock or pilot-operated check valve for fail-safe positioning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.