
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X10-10 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 10mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X10-10 is a double-acting JIS compact cylinder with an external threaded stop and lock nut that limits the extend end position. The full stroke is 10 mm, and the 10 mm adjustment window allows you to fine-tune the usable extend range from 0 to 10 mm directly on the machine. The retract stroke remains completely unaffected.
This 32 mm bore unit features a 16 mm piston rod, a PT1/8 port, and a female M8x1.25 rod-end thread. The external adjuster utilizes an M12x1.25 thread. It incorporates a fixed elastomer NBR bumper at each end for deceleration and operates at speeds between 30 and 500 mm/s. Please note that this specific configuration ships without a magnet, though the body retains integrated sensor grooves for future sensing upgrades.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X10-10 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 10 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping extension from 0 to 10 mm during setup on a CNC machining center to accommodate varying part tolerances without swapping hardware.
Adjust the physical stop position for product changeovers on a modular assembly line, ensuring precise component placement without reprogramming the motion controller.
Fine-tune the pressing height on a packaging machine to handle different carton sizes, relying on the fixed elastomer bumper to absorb the impact at the end of stroke.
If your application requires a fixed 10 mm stroke without on-site end-position tuning, a standard ACQ32X10 cylinder is sufficient. To order this adjustable model correctly, confirm the 32 mm bore, 10 mm full stroke, 10 mm adjustment window, female rod thread, and the absence of the -S magnet option.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The usable extend range is 0-10 mm (10 mm full stroke minus the 10 mm window).
The M12x1.25 external threaded stop with lock nut limits only the extend stroke length; it does not alter the piston area or reduce the force output. The cylinder uses a fixed elastomer bumper and will not hold a load on air loss, so an external rod lock or pilot-operated check valve is required for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.