Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X10-10B
The AirTAC Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X10-10B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 10mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
- BoreØ32 mm
- Full stroke10 mm
- Port sizePT1/8
- Adjuster threadM12×1.25
About the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X10-10B
The AirTAC ACQJ32X10-10B is a double-acting JIS compact cylinder with a 32 mm bore and 10 mm full stroke. An external M12x1.25 threaded stop and lock nut restricts the extend end position, giving a usable extend range of 0-10 mm. The retract stroke remains fixed at its standard length. Because the piston area is unchanged, output force equals a standard ACQ, delivering 402.1 N push at 0.5 MPa.
This variant features a male M14x1.5 rod-end thread for direct load coupling and uses a PT1/8 port. It includes fixed NBR elastomer bumpers at both ends for deceleration rather than adjustable air cushions. The body retains magnetic-switch grooves, though this specific SKU ships without a magnet.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X10-10B Technical Specifications
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X10-10B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 10 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; the piston area — and therefore the force — is the same as a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Force equals a standard ACQ of the same bore — the adjuster changes stroke length, not piston area. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X10-10B
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Where the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X10-10B Is Used
Prototype Clamp Positioning
Dial in the exact clamping depth on a machining fixture during first-article trials without machining new spacers.
Product Changeover Stops
Quickly alter the extend endpoint on a packaging conveyor when switching between carton sizes on the line.
Assembly Press Tuning
Fine-tune the pressing distance of a 32 mm bore unit on an electronic board assembly station to prevent component damage.
Is the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X10-10B the Right Cylinder?
For 0.5 MPa push requirements near 301.6 N, dropping to a 25 mm bore provides a smaller footprint, while stepping up to a 40 mm bore yields 628.3 N push for heavier transfers. Choose this 32 mm bore if your fixture demands roughly 402.1 N of push force within a tight axial envelope. If the end position never varies, a fixed-stroke ACQ is simpler; select this ACQJ only when on-the-fly extend adjustments are necessary. Confirm ordering essentials: 32 mm bore, 10 mm full stroke, 10 mm window, male rod thread, and no magnet.
Quick checklist
- ✓ Need on-machine end-position tuning?
- ✓ Full stroke and adjust window (mm)
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the adjuster nut after setting the stop.
- check The stop limits the EXTEND stroke only.
- check Avoid side load on the short piston rod.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X10-10B FAQ
The 32 mm bore yields 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. The 10 mm window allows a usable extend range of 0-10 mm. It operates at 0.15-1.0 MPa, features a PT1/8 port, and the rod end has an M14x1.5 male thread.
No, the adjuster only limits how far the rod extends; the piston area remains the same, so force is identical to a standard ACQ. The cylinder relies on fixed elastomer bumpers for end-of-stroke deceleration, not adjustable air cushions. Note that without a pilot-operated check valve or external rod lock, the cylinder will not hold its load if air pressure is lost.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQJ Compact Cylinders
Request a Quote for Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X10-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.