
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X125-40 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 125mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X125-40 is a double-acting JIS compact cylinder featuring a 125mm stroke and a 40mm external adjustment window. An external M12x1.25 threaded stop with a lock nut lets you set the extend end position anywhere in an 85 to 125mm usable range directly on your equipment. The retract stroke remains completely unaffected by this mechanism. This unit is a long-stroke, made-to-order variant because the 125mm travel exceeds the standard 100mm maximum for a 32mm bore.
Because the internal piston area stays constant, output force is identical to a standard ACQ of this size. The body uses a fixed NBR elastomer bumper at each end for end-of-travel deceleration rather than an adjustable air cushion. It features a 16mm rod, a female M8x1.25 rod-end thread, and a PT1/8 port.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X125-40 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 125 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×125 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact extend stop from 85 to 125mm on a CNC machining fixture without machining new spacers when raw part dimensions vary slightly.
Rapidly adjust the extend end position during product format changeovers on a packaging line to accommodate different carton depths.
Safely test different extend end positions on an assembly press to find the optimal engagement depth before finalizing a hard mechanical stop.
If your equipment never requires end-position tuning, a fixed-stroke ACQ cylinder will suffice and cost less. For ordering, confirm the 32mm bore, 125mm full stroke, 40mm window, female rod thread, and note that this specific SKU ships without a magnet (no -S suffix) even though the body retains sensor grooves.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The usable extend range is 85-125mm, achieved by using the 40mm adjustment window to shorten the 125mm full stroke.
The external M12x1.25 threaded stop and lock nut mechanically limit how far the rod extends, shortening the stroke without changing the piston area or force. Deceleration relies on fixed NBR elastomer bumpers, not adjustable air cushions. The cylinder will not hold a load if air pressure is lost; use an external rod lock or pilot-operated check valve for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.