
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X150-100 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 150mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X150-100 is a double-acting JIS compact cylinder with an external adjustable extend stop. It features a 32mm bore and a 150mm full stroke, which places it in the long-stroke, made-to-order category for this size since the standard max is 100mm. An external threaded adjuster with a lock nut lets you fine-tune the extend end position on the machine. The usable extend range spans 50 to 150mm, while the retract stroke remains completely unaffected.
Because the adjuster only limits travel and not piston area, the output force is identical to a standard ACQ of the same bore. This unit includes fixed NBR elastomer bumpers at both ends for end-of-stroke deceleration and features sensor grooves, though it ships without a magnet. The body uses a PT1/8 port and a 16mm rod with an M8x1.25 female thread.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X150-100 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 150 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Quickly dial in the extend position from 50 to 150mm using the M12x1.25 external adjuster when switching between part families on a machining line.
Set exact pressing depth on-site without swapping cylinders, leveraging the fixed NBR bumpers to handle end-of-stroke impact at the new location.
Trial different extend endpoints during R&D machine setup, locking the 16mm rod via the lock nut once the ideal kinematic position is found.
A fixed-stroke ACQ is adequate if your end position never varies, but this adjustable stop saves time during product changeovers. When ordering, confirm the 150mm full stroke, the 100mm adjustment window, and the female rod thread. If you require position sensing, select the -S magnet option, as this specific unit ships without one.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The full stroke is 150mm with a 100mm window, giving a usable extend range of 50 to 150mm. The retract stroke remains unaffected.
An external threaded stop with a lock nut limits the extend travel, allowing on-machine tuning without changing parts. The adjuster changes stroke length only, so force remains identical to a standard ACQ. Fixed elastomer bumpers handle deceleration at both ends, and the body has sensor grooves, though this model ships without a magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.