
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X150-100S is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 150mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X150-100S is a double-acting JIS compact cylinder featuring a 150mm full stroke and a built-in piston magnet. As a long-stroke made-to-order variant, it exceeds the standard 100mm maximum for the 32mm bore, extending up to the 300mm range. It uses an external M12x1.25 threaded stop with a lock nut to limit the extend stroke, providing a usable extend range of 50-150mm. The retract distance remains completely unaffected by this adjustment.
Because the adjustment mechanism only restricts rod travel, the piston area stays the same, meaning the output force is identical to a standard ACQ of this bore. The unit features fixed NBR elastomer bumpers at both ends for end-of-stroke deceleration and includes magnetic-switch grooves for position sensing.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X150-100S |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 150 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact extend position on a CNC machining fixture during product changeover without machining new stop blocks.
Adjust the extend endpoint on a packaging line to accommodate varying box heights and flap thicknesses on the fly.
Set trial end positions for pressing bearings on an assembly line, fine-tuning the 50-150mm stroke window per part run.
If you do not require on-machine extend tuning, a fixed-stroke ACQ32x150 is simpler and suffices. To order this exact unit, confirm the 32mm bore, 150mm full stroke, 100mm adjustment window, the -S magnet for electronic or reed switches, and the default female M8x1.25 rod-end thread. Remember that a plain ACQ-type cylinder will not hold its load on air loss; install an external rod lock or pilot-operated check valve for fail-safe holding.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
This long-stroke cylinder has a 150mm full stroke with a 100mm adjustment window, allowing a usable extend range of 50-150mm. The port size is PT1/8.
The external M12x1.25 threaded stop with a lock nut limits only the extend stroke length, leaving the retract stroke unaffected. Because the piston area is unchanged, the force remains identical to a standard ACQ. The cylinder uses fixed NBR elastomer bumpers at each end for deceleration, not adjustable air cushions, so external shock absorbers are recommended for high-energy loads. The -S magnet works with reed or solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.