
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X150-75B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 150mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X150-75B is a double-acting JIS compact cylinder featuring a 32mm bore and a 150mm extended travel length. Because 150mm exceeds the 100mm standard maximum for this bore size, this unit is configured as a long-stroke made-to-order variant. It incorporates an external M12x1.25 threaded stop with a lock nut on the extend side, allowing you to fine-tune the usable extend range from 75mm up to the full 150mm directly on the machine. The retract stroke remains completely unaffected by this adjustment.
This model includes the -B option, providing a male M14x1.5 rod-end thread for direct load coupling, and uses PT1/8 ports. It relies on a fixed NBR elastomer bumper at each end for deceleration rather than an adjustable air cushion. While it lacks a -S magnet, the body retains sensor grooves for adding external switches.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X150-75B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 150 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact extend position for varying part heights on a milling fixture using the external stop, avoiding the need to fabricate custom spacer rings.
Quickly reset the extend endpoint during packaging line format changes to accommodate different box sizes without swapping out the entire actuator.
Establish trial end positions for a press operation, testing insertion depths on new sub-assemblies before locking down the adjuster nut.
If your extend position never varies, a fixed-stroke ACQ32 cylinder is simpler and more cost-effective. For this adjustable model, confirm the 32mm bore, 150mm full stroke, 75mm adjustment window, and the male M14x1.5 rod thread. Note that a plain compact cylinder drifts on air loss; for fail-safe load holding, specify an external rod lock or pilot-operated check valve.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The force is identical to a standard ACQ32: push is 402.1N and pull is 301.6N at 0.5MPa, push is 562.9N at 0.7MPa, and max push is 82kgf at 1.0MPa. The full stroke is 150mm, but the external stop allows you to shorten the extend stroke by 75mm, yielding a usable extend range of 75-150mm.
An external M12x1.25 threaded screw with a lock nut limits how far the rod extends, changing only the stroke length, not the force. Deceleration is handled by fixed NBR elastomer bumpers, not adjustable air cushions. This unit lacks a -S magnet, but the body features grooves ready to accept reed or solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.