
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X175-100 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 175mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X175-100 is a double-acting, double-rod JIS compact cylinder built for long-stroke applications, featuring an external threaded stop with a lock nut that limits the EXTEND end position. Because the full stroke is 175 mm and the adjustment window is 100 mm, the usable extend range runs from 75 mm up to 175 mm. The RETRACT stroke remains completely unaffected by this mechanism. This specific 175 mm stroke exceeds the standard 100 mm maximum for a bore 32 unit, classifying it as a long-stroke, made-to-order variant.
Force output is identical to a standard ACQ of the same bore, as the adjuster changes stroke length only and not the piston area. Operating pressure ranges from 0.15 to 1.0 MPa, and the unit relies on a fixed elastomer bumper (NBR) at each end for deceleration rather than an adjustable air cushion. The body retains magnetic-switch grooves, though this particular configuration ships without a magnet. For high-speed or high-energy cycling, adding an external shock absorber or slowing the approach speed is recommended.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X175-100 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 175 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact extend position on a CNC machining fixture without swapping cylinders, accommodating varying raw material thicknesses on the fly.
Rapidly reposition a conveyor sorting gate for different package lengths by turning the external M12x1.25 adjuster thread and locking the nut.
Safely test multiple extend endpoints during an assembly press setup, using the 75 to 175 mm usable range to find the optimal pressing depth before finalizing.
When sizing this cylinder, note that a standard fixed-stroke ACQ32 is sufficient if your extend position never varies. To order this adjustable model correctly, confirm the 32 mm bore, the 175 mm full stroke, the 100 mm window, the female rod-end thread (M8x1.25), and the PT1/8 port. Since this is a long-stroke variant, verify your machine envelope can accommodate the extended retracted length. Keep in mind that a plain ACQ-type cylinder does not hold its load on air loss or when a valve is centered; the rod will drift. For a fail-safe hold, specify an external rod lock or a pilot-operated check valve.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
This cylinder has a 32 mm bore, a 175 mm full stroke, and a 100 mm adjustment window, giving a usable extend range of 75 to 175 mm.
No, the external threaded stop only changes the extend stroke length, not the piston area, so force remains unchanged. The cylinder uses a fixed elastomer bumper for deceleration, not an adjustable air cushion. Additionally, it will not hold a load on air loss; for fail-safe holding, an external rod lock or pilot-operated check valve is required.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.