
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X175-10B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 175mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X175-10B is a double-acting JIS compact cylinder with a 175mm full stroke and a male M14x1.5 rod end (-B). An external M12x1.25 threaded stop with a lock nut lets you trim the extend travel by up to 10mm, yielding a usable extend range of 165-175mm. The retract stroke remains completely unaffected. Because the piston area stays constant, output force is identical to a standard ACQ of this bore.
This unit is a long-stroke made-to-order variant, exceeding the 100mm standard maximum for a 32mm bore. It pushes with 402.1N at 0.5MPa and handles up to 82kgf at 1.0MPa. The body features fixed NBR elastomer bumpers for end-of-stroke deceleration and includes magnetic-switch grooves, though this specific configuration ships without a magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X175-10B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 175 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Quickly dial in a new extended end position within the 165-175mm window when switching between packaging formats on a filling line.
Trial different extend endpoints during CNC fixture setup without machining new spacers or swapping the cylinder body.
Fine-tune the push depth of a 32mm bore actuator pushing components into a test rig without reprogramming the machine.
For sizing context, dropping to a 25mm bore lowers the push force to 245.4N at 0.5MPa, while stepping up to a 40mm bore increases it to 628.3N. If your application never requires end-position tuning, a fixed-stroke ACQ32X175 will suffice and cost less. When ordering this adjustable version, verify the bore, 175mm full stroke, 10mm window, male rod thread, and confirm no magnet is needed.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The usable extend range is 165-175mm (a 10mm adjustable window subtracted from the 175mm full stroke).
No, the adjuster only limits the extend stroke length, so force remains identical to a standard ACQ. The cylinder uses fixed elastomer bumpers, not air cushions. Note that a plain compact cylinder will drift and not hold a load if air pressure is lost; use an external rod lock for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.