
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X175-40S is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 175mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The ACQJ32X175-40S is a double-acting JIS compact cylinder with a 175mm extended stroke, built as a made-to-order variant since the standard maximum for this 32mm bore is 100mm. It incorporates a 40mm adjustable window, meaning the extend end position can be fine-tuned on the machine anywhere from 135mm up to the full 175mm. The retract stroke remains completely unaffected.
The Ø16mm rod uses an M8x1.25 female end, and the M12x1.25 adjuster thread locks securely with a nut. It includes an -S magnet for electronic or reed switches and relies on fixed NBR elastomer bumpers for end-of-stroke deceleration.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X175-40S |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 175 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the extend stop from 135 to 175mm when swapping machining fixtures on a CNC mill, avoiding the need to fabricate custom spacer plates.
Tune the rod extension on the fly for different carton sizes on a packaging line, using the external stop to set precise pushing distances.
Establish optimal end positions during equipment R&D by testing various extend lengths within the 40mm window before finalizing mechanical hard stops.
A standard fixed-stroke ACQ suffices if your extend endpoint never varies. When ordering this long-stroke unit, confirm the 175mm travel, 40mm window, PT1/8 port, and the -S magnet requirement. Note that a plain compact cylinder drifts on air loss, so add an external rod lock for fail-safe load holding.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
This 32mm bore cylinder has a usable extend range of 135-175mm (175mm full stroke minus the 40mm window). The retract stroke remains the full 175mm.
No, the force is identical to a standard ACQ because the external M12x1.25 threaded stop only limits travel length without altering piston area. The cylinder uses fixed NBR elastomer bumpers at both ends for deceleration rather than adjustable air cushions. The built-in -S magnet supports both reed and solid-state electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.