
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X20-10S is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 20mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The ACQJ32X20-10S is a double-acting JIS compact cylinder with a 32mm bore and 20mm full stroke. An external M12x1.25 threaded stop and lock nut restricts the extend end position, yielding a usable extend range of 10 to 20mm. The retract stroke remains completely unaffected by this adjustment. Because the piston area stays constant, output force equals that of a standard ACQ counterpart.
This unit includes a female M8x1.25 rod-end thread, a PT1/8 port, and a 16mm piston rod. A factory-fixed NBR elastomer bumper decelerates the load at each end without requiring manual cushion adjustment. The -S suffix equips the piston with a magnet compatible with both reed and solid-state electronic switches.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X20-10S |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 20 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×20 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact extend position between 10 and 20mm when clamping raw castings of varying widths on a CNC milling table.
Rapidly reposition the extend end-stop for a new product run on an automated assembly line without swapping out cylinder hardware.
Establish the ideal trial extend endpoint for a new testing rig, locking the M12x1.25 adjuster nut once the optimal reach is found.
If your machine never needs end-position tuning, a fixed-stroke ACQ32x20 is simpler. To order correctly, confirm the 20mm full stroke, 10mm adjuster window, S magnet option, and female M8x1.25 rod thread.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The 20mm full stroke features a 10mm adjustable window, allowing the extend range to be set anywhere from 10 to 20mm.
No, the external stop only limits the extend length, so force remains identical to a standard ACQ. Deceleration is handled by fixed NBR elastomer bumpers at both ends, not adjustable air cushions, and the retract stroke stays completely unaffected.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.