
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-10 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 200mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X200-10 is a double-acting, double-rod JIS compact cylinder engineered as a long-stroke, made-to-order variant, exceeding the standard 100mm maximum for this 32mm bore to deliver a 200mm full stroke. It features an external M12x1.25 threaded stop with a lock nut on the extend side, allowing you to fine-tune the end position directly on the machine. The usable extend range spans 190-200mm, shortening the stroke by up to 10mm, while the retract stroke remains completely unaffected.
The unit incorporates a fixed NBR elastomer bumper at each end for end-of-stroke deceleration rather than an adjustable air cushion. It ships without a piston magnet, though the body retains magnetic-switch grooves for optional sensing upgrades.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-10 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 200 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Ideal for machining fixtures needing a 200mm reach where the final clamp pressure point must be dialed in within a 10mm window to accommodate varying part heights.
Suited for conveyor sorting gates where the extend stroke requires precise 190-200mm tuning during product changeovers without swapping out cylinder hardware.
Useful on automated assembly lines for trial end positions, allowing operators to tweak the extend stop externally to prevent over-travel during press operations.
If your application requires a fixed 200mm stroke without on-the-fly end-position adjustments, a standard ACQ32X200 cylinder will suffice. When ordering this adjustable model, confirm the 32mm bore, 200mm full stroke, 10mm adjustment window, female M8x1.25 rod-end thread, PT1/8 port, and that no magnet (-S) is required.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The full stroke is 200mm, but the external adjuster allows the usable extend range to be shortened to 190-200mm.
The external M12x1.25 threaded stop with lock nut limits the extend distance without altering the piston area, meaning force remains identical to a standard ACQ. The cylinder uses fixed elastomer bumpers, not adjustable cushions, and because it lacks a rod lock, the load will drift on air loss; use an external pilot-operated check valve for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.