
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-30 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 200mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X200-30 is a double-acting, double-rod JIS compact cylinder featuring an external threaded stop with a lock nut that restricts the extend end position. You can fine-tune the extend stroke on the machine from 170 mm up to the full 200 mm without swapping components, while the retract stroke remains completely unaffected. This long-stroke variant is a made-to-order unit, as the 200 mm travel exceeds the standard 100 mm maximum for a 32 mm bore.
The body uses a PT1/8 port, a 16 mm rod, and fixed NBR elastomer bumpers at each end for end-of-travel deceleration rather than adjustable pneumatic cushions. Sensor grooves are integrated into the body, though this specific configuration ships without a magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-30 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 200 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the extend stop from 170 to 200 mm on a CNC lathe loader to accommodate raw stock of varying lengths without machining custom spacers.
Rapidly adjust the end position on a packaging line's flap folder when transitioning between different box heights, securing the lock nut in seconds.
Find the exact 32 mm bore contact depth for a new assembly press by threading the external stop inward during R&D trials before finalizing the setup.
When sizing this unit, stepping down to a 25 mm bore drops the 0.5 MPa push force to 245.4 N, whereas stepping up to a 40 mm bore increases it to 628.3 N. If your application always operates at a fixed 200 mm extend position without variation, a standard non-adjustable ACQ cylinder will suffice. To order correctly, confirm the 32 mm bore, the 200 mm full stroke, the 30 mm adjustable window, the female M8x1.25 rod-end thread, and the M12x1.25 external adjuster thread. Remember that a plain compact cylinder will drift and cannot hold a load on air loss, so utilize an external rod lock or pilot-operated check valve if fail-safe holding is required.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The full stroke is 200 mm, but the external adjuster allows you to shorten the extend travel by up to 30 mm, giving a usable extend range of 170-200 mm.
The external M12x1.25 threaded stop with a lock nut mechanically limits how far the rod extends, shortening the stroke length only. It does not alter the piston area, so the force remains identical to a standard ACQ. Deceleration is handled by fixed NBR elastomer bumpers at each end, not an adjustable air cushion, and this model ships without a magnet in the piston.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.