
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-40 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 200mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
An external threaded stop with a lock nut limits the extend end position, providing a usable extend range of 160-200mm without changing parts. The retract stroke remains unaffected.
Because the piston area is unchanged, the adjuster modifies stroke length only, keeping force identical to a standard ACQ of this bore. The body includes magnetic-switch grooves, though this specific configuration ships without a magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-40 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 200 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Ideal for machining fixtures requiring different clamp depths across part families, allowing rapid 160-200mm extend adjustments without swapping hardware.
Acts as a retractable dead-stop on packaging lines, letting operators dial in the exact 160-200mm extension needed for varying carton widths on the fly.
Perfect for lab automation where trial end positions must be tested iteratively, providing a 40mm tuning window to find optimal motion paths.
If exact end-position tuning is unnecessary, a fixed-stroke ACQ cylinder suffices. To order, confirm the 32mm bore, 200mm full stroke, 40mm adjuster window, female rod-end thread (M8x1.25), and PT1/8 port.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The usable extend range is 160-200mm (200mm full stroke minus a 40mm window). The piston rod is Ø16mm, the female rod-end thread is M8x1.25, the external adjuster thread is M12x1.25, and the port is PT1/8.
The external M12x1.25 threaded stop with a lock nut mechanically limits how far the rod extends, shortening the forward stroke without altering the piston area, so force remains identical to a standard ACQ. Deceleration is handled by fixed NBR elastomer bumpers at both ends, not an adjustable air cushion. Note that this model ships without a magnet, though the body retains sensor grooves for adding reed or solid-state switches if needed.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.