Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-40B
The AirTAC Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-40B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 200mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
- BoreØ32 mm
- Full stroke200 mm
- Port sizePT1/8
- Adjuster threadM12×1.25
About the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-40B
The AirTAC ACQJ32X200-40B is a double-acting, single-rod JIS compact cylinder built for applications requiring precise extend-end positioning. It features a 32mm bore and a 200mm stroke, which is a made-to-order long-stroke variant exceeding the standard 100mm maximum for this bore size. An external threaded stop with a lock nut limits how far the rod extends, providing a usable extend range of 160 to 200mm. The retract stroke remains completely unaffected by this adjustment. Because the piston area is unchanged, the output force is identical to a standard ACQ of the same bore.
This model includes a male M14x1.5 piston rod thread for direct load coupling and uses PT1/8 ports. It operates at pressures from 0.15 to 1.0 MPa and travels at speeds of 30-500 mm/s. Deceleration is handled by a fixed NBR elastomer bumper at each end rather than an adjustable air cushion. While the body features magnetic-switch grooves, this specific unit ships without a magnet, so external sensors will not detect the piston position.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-40B Technical Specifications
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-40B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 200 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; the piston area — and therefore the force — is the same as a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Force equals a standard ACQ of the same bore — the adjuster changes stroke length, not piston area. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-40B
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Where the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-40B Is Used
Machining Fixture Stops
Dial in the exact extend position of a clamping fixture during setup. The external stop allows operators to tune the 160-200mm range without machining custom spacer rings.
Product Changeover Pushers
Adjust the extend stroke on a packaging line when switching to a different carton size. The lock nut secures the new end position quickly to maintain line pacing.
Trial Positioning on Assembly Lines
Test different extend endpoints for a pressing operation on an automated assembly machine. Fine-tune the contact depth against the workpiece before locking the final position.
Is the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-40B the Right Cylinder?
When sizing this cylinder, note the 32mm bore delivers a push force of 402.1 N and a pull force of 301.6 N at 0.5 MPa. Stepping down to a 25mm bore reduces push to 245.4 N, while stepping up to a 40mm bore increases push to 628.3 N. If your machine only requires a fixed 200mm extend position, a standard ACQ32X200 cylinder suffices. For setups needing on-the-fly end-position tuning within a 40mm window, the ACQJ32X200-40B is the correct choice. Confirm your ordering essentials: 32mm bore, 200mm full stroke, 40mm adjustable window, male rod thread, and no magnet.
Quick checklist
- ✓ Need on-machine end-position tuning?
- ✓ Full stroke and adjust window (mm)
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the adjuster nut after setting the stop.
- check The stop limits the EXTEND stroke only.
- check Avoid side load on the short piston rod.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-40B FAQ
This 32mm bore cylinder delivers a push force of 402.1 N and a pull force of 301.6 N at 0.5 MPa. At 0.7 MPa, the push force is 562.9 N, with a maximum push of 82 kgf at 1.0 MPa. The 40mm adjustable window allows the usable extend range to be set anywhere from 160mm up to the full 200mm stroke.
The external M12x1.25 threaded stop with a lock nut physically limits the rod's extend travel, shortening the stroke within the 40mm window. It does not alter the piston area, so the output force remains identical to a standard ACQ. Deceleration is managed by a fixed elastomer bumper at each end, not an adjustable air cushion, so you may need an external shock absorber for high-energy loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQJ Compact Cylinders
Request a Quote for Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-40B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.