
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-50 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 200mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
This double-acting double-rod JIS compact cylinder features an external threaded stop with a lock nut that limits the EXTEND end position. You can fine-tune the extend travel on the machine across a 150-200mm usable range (the 200mm full stroke minus up to a 50mm window) without swapping parts. The RETRACT stroke remains completely unaffected. Because the piston area is unchanged, the output force equals a standard ACQ of the same bore.
As a long-stroke made-to-order variant, the 200mm stroke exceeds the 100mm standard maximum for a 32mm bore, extending into the 100-300mm long-stroke range. It includes a fixed NBR elastomer bumper at each end for end-of-stroke deceleration rather than an adjustable air cushion. The body features magnetic-switch grooves, though this specific unit ships without a magnet. Operating pressure is 0.15-1.0 MPa, and the PT1/8 port pairs with a 16mm rod.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-50 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 200 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on a CNC fixture during product-changeover, shortening the extend stroke from 200mm down to 150mm to accommodate different part heights.
Act as a diverter or end-stop on a packaging conveyor, where the external lock nut allows operators to tweak the extended stop position for varying carton lengths on the fly.
Establish trial end positions on an assembly press, testing insertion depths precisely on the machine before locking the M12x1.25 adjuster thread for production runs.
Stepping down to a 25mm bore drops the push force to 245.4N, while stepping up to a 40mm bore increases it to 628.3N. If your application never requires end-position adjustments, a fixed-stroke ACQ cylinder suffices. To order this adjustable version correctly, confirm the 32mm bore, 200mm full stroke, 50mm window, female M8x1.25 rod-end thread, and PT1/8 porting.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The usable extend range is 150-200mm (the 200mm full stroke minus up to a 50mm window).
No. The external stop limits the extend stroke length only, leaving the retract stroke unaffected. Because the piston area remains the same, the output force is identical to a standard ACQ. The unit relies on a fixed elastomer bumper for deceleration and does not hold loads on air loss.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.