
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X25-30 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 25mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X25-30 is a double-acting JIS compact cylinder featuring a 32mm bore and 25mm full stroke. An external M12x1.25 threaded stop with a lock nut limits the extend end position, allowing you to fine-tune the stroke on the machine without swapping parts. The usable extend range is 0-25mm, while the retract stroke remains completely unaffected.
The unit uses a PT1/8 port, a 16mm piston rod with an M8x1.25 female thread, and fixed NBR elastomer bumpers at both ends for end-of-stroke deceleration. The body includes magnetic-switch grooves, though this specific configuration ships without a magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X25-30 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 25 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping extension on a machining fixture to accommodate raw material thickness variations without manufacturing custom spacer plates.
Rapidly adjust the extend end stop during packaging line product changeovers to hit different carton pusher depths quickly and accurately.
Establish precise trial end positions on an electronic assembly press, safely testing engagement depths before finalizing the mechanical hard stop.
When sizing this 32mm bore actuator, stepping down to a 25mm bore reduces the 0.5MPa push force to 245.4N, whereas stepping up to a 40mm bore increases it to 628.3N. If your application never requires altering the extend end-position, a fixed-stroke ACQ cylinder will suffice and simplify assembly. To order correctly, confirm the 32mm bore, 25mm full stroke, 30mm adjustable window, female rod thread, and whether you need the -S magnet option for sensing.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The maximum push force is 82kgf at 1.0MPa. The full stroke is 25mm with a 30mm adjustable window, yielding a usable extend range of 0-25mm. It features a PT1/8 port, a 16mm rod, an M8x1.25 female rod-end thread, and an M12x1.25 external adjuster thread.
No, the adjuster only limits how far the rod extends, leaving the piston area untouched, so force remains identical to a standard ACQ. The retract stroke is also unaffected. The cylinder relies on fixed NBR elastomer bumpers for end-of-stroke deceleration rather than adjustable air cushions. Note that this model ships without a magnet, but the body retains sensor grooves for adding reed or solid-state switches if needed.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.