
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X30-30B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 30mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X30-30B is a double-acting JIS compact cylinder featuring a 32mm bore and a 30mm full stroke. It includes a male-thread (M14x1.5) piston rod end for direct load coupling. An external M12x1.25 threaded stop with a lock nut lets you fine-tune the extend end position on the machine without swapping parts. The usable extend range spans 0-30mm, while the retract stroke remains completely unaffected.
Because the adjuster only limits travel length and not the piston area, the output force is identical to a standard ACQ of this bore. The body incorporates fixed elastomer bumpers at both ends for end-of-stroke deceleration and includes sensor grooves, though this specific unit ships without a magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X30-30B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 30 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Adjust the extend stop from 0 to 30mm on machining fixtures to accommodate different part lengths without fabricating new mechanical spacers.
Fine-tune the extend position rapidly during packaging line format changes, hitting exact contact points for varying carton sizes.
Dial in the exact extension distance during prototype assembly machine setup, locking the M12x1.25 adjuster nut once the ideal kinematics are found.
If your setup never requires altering the end position, a fixed-stroke ACQ32 cylinder will achieve the same output. To order, confirm the 32mm bore, 30mm full stroke, 30mm adjustable window, the male rod thread (-B), and your port thread (PT1/8 standard).
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The full stroke is 30mm with a 30mm adjustable window, giving a usable extend range of 0-30mm.
An external M12x1.25 threaded screw with a lock nut limits the extend travel, allowing on-machine position tuning. It changes only the stroke length, so force remains identical to a standard ACQ32. The cylinder uses fixed elastomer bumpers for deceleration, and a plain ACQ-type does not hold its load on air loss without an external rod lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.