
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X300-75B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 300mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The ACQJ32X300-75B is a double-acting, double-rod JIS compact cylinder built for applications requiring variable extend end-positions. It features an external threaded stop with a lock nut on the rod-end side, allowing you to fine-tune the extend stroke directly on the machine without swapping parts. With a full stroke of 300 mm and a 75 mm adjustment window, the usable extend range spans 225 to 300 mm. The retract stroke remains completely unaffected by this adjustment.
This long-stroke, made-to-order variant exceeds the standard 100 mm maximum stroke for a 32 mm bore. It includes a male M14x1.5 rod-end thread for direct load coupling, a fixed NBR elastomer bumper at each end for end-of-stroke deceleration, and a PT1/8 port. Note that this unit ships without a magnet; while the body retains sensor grooves, a separate magnet accessory is required for reed or solid-state switch activation.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X300-75B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 300 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact extend position for varying workpiece lengths on a CNC lathe loader without machining custom spacers.
Adjust the extend stroke on a packaging line diverter gate on the fly to accommodate different carton widths during format changes.
Fine-tune the ejection point of parts from a hydraulic press over a 225-300 mm range to test optimal transfer positions.
A fixed-stroke ACQ is sufficient if your end-position never varies. When ordering, confirm the 300 mm full stroke, the 75 mm window, the male M14x1.5 rod thread, and the absence of the -S magnet. For load-holding safety during air loss, pair this cylinder with an external rod lock or pilot-operated check valve, as the standard bumper does not prevent drift.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The full stroke is 300 mm with a 75 mm adjustable window, yielding a usable extend range of 225-300 mm. The piston rod is 16 mm with a male M14x1.5 thread, an M12x1.25 adjuster thread, and a PT1/8 port.
The external threaded stop limits only the extend stroke length; it does not alter piston area, so force remains identical to a standard ACQ. Deceleration is handled by a fixed NBR elastomer bumper at each end, not an adjustable air cushion. This specific model ships without a -S magnet, though the body retains grooves for mounting reed or solid-state sensors if a magnet is added later.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.