
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X40-30S is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 40mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X40-30S is a double-acting JIS compact cylinder with an external threaded stop and lock nut that limits the extend stroke. You get a usable extend range of 10 to 40 mm, while the retract stroke remains unaffected. Because the piston area stays the same, force is identical to a standard ACQ of this bore.
It features a fixed NBR elastomer bumper at each end, PT1/8 ports, and a built-in magnet (-S) for position sensing. The external adjuster uses an M12x1.25 thread to set your end position precisely on the machine.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X40-30S |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 40 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×40 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping extension on a CNC fixture during first-article inspection without swapping cylinders.
Adjust the extend endpoint on packaging lines to accommodate different carton sizes on the fly.
Find the optimal push distance on a test rig by turning the external stop screw, then locking the nut.
If you need less push force, the 25 mm bore yields 245.4 N at 0.5 MPa, whereas stepping up to the 40 mm bore provides 628.3 N. Choose this model when your end position requires frequent trial adjustments or product changeovers; a fixed-stroke ACQ is simpler if the extend length never varies. Confirm your ordering essentials: 32 mm bore, 40 mm full stroke, 30 mm window, -S magnet, and the default female M8x1.25 rod-end thread.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The full stroke is 40 mm with a 30 mm adjustable window, giving a usable extend range of 10 to 40 mm. It uses PT1/8 ports, a female M8x1.25 rod-end thread, and an M12x1.25 external adjuster thread.
No, the external stop only changes the extend stroke length, not the piston area, so force remains identical to a standard ACQ. The cylinder uses fixed NBR elastomer bumpers for end-of-stroke deceleration, not an adjustable air cushion. Note that a plain compact cylinder will not hold a load if air pressure is lost; for fail-safe holding, add an external rod lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.