
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X45-20 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 45mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X45-20 is a double-acting JIS compact cylinder featuring an external threaded stop with a lock nut that limits the extend end position. You can fine-tune the usable extend range from 25 mm up to the full 45 mm directly on the equipment, while the retract stroke remains completely unaffected. The adjuster features an M12x1.25 thread.
The unit includes a fixed elastomer bumper at each end for end-of-stroke deceleration and integrated sensor grooves. It operates on filtered 40 um air, utilizing a PT1/8 port and a 16 mm piston rod with a female M8x1.25 end thread.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X45-20 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 45 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on a CNC machining fixture during initial setup, allowing 25 to 45 mm of extension to accommodate varying raw material thicknesses without swapping cylinders.
Adjust the extend end position on a packaging line when transitioning between different carton sizes, using the external stop to rapidly set new folding depths without disassembling the pneumatic assembly.
Test multiple pressing depths on an automated assembly press by tweaking the lock nut, finding the optimal end position for inserting electronic connectors before finalizing the mechanical cycle.
If the exact 45 mm extend position is permanently fixed and never requires on-machine tweaking, a standard non-adjustable ACQ32 cylinder will suffice. When ordering this adjustable variant, confirm the 32 mm bore, 45 mm full stroke, 20 mm window, female M8x1.25 rod thread, and whether you need the -S magnet option for electronic or reed switch sensing.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The usable extend range is 25-45 mm (a 20 mm window off the 45 mm full stroke).
The external M12x1.25 threaded stop and lock nut mechanically limits how far the rod extends, changing only the stroke length, not the piston area, so output force remains unchanged. The cylinder uses fixed elastomer bumpers for deceleration and will not hold a load if air pressure is lost; for fail-safe holding, an external rod lock is required.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.