
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X45-40B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 45mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X45-40B is a double-acting JIS compact cylinder featuring an external male-thread piston rod end (M14x1.5) that couples directly to your load. An external threaded stop with a lock nut limits the extend end position, providing a usable forward range of 5 to 45 mm from a 45 mm full stroke. The retract stroke remains completely unaffected by this adjustment.
The unit retains its compact C-clip body and fixed NBR elastomer bumpers at each end. Note that this specific configuration ships without a magnet, though the body still features magnetic-switch grooves for adding external sensors later.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X45-40B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 45 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact extend end position during initial fixture setup without machining new spacers or swapping components on the fly.
Quickly alter the forward reach to accommodate varying part heights or lengths on a packaging line during rapid product transitions.
Safely test trial end stops and clamp depths on an R&D assembly rig, fine-tuning the 5 to 45 mm range until kinematics are proven.
If the forward end position never varies, a fixed-stroke ACQ cylinder is simpler and sufficient. When ordering this adjustable unit, confirm the 32 mm bore, 45 mm full stroke, 40 mm window, male M14x1.5 rod thread, and PT1/8 port.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The usable extend range is 5 to 45 mm (a 45 mm full stroke minus a 40 mm window).
The external M12x1.25 threaded stop with lock nut limits only the extend length, meaning force is identical to a standard ACQ. Fixed NBR bumpers decelerate the load near stroke ends. A plain ACQ-type cylinder will not hold its load on air loss, so use an external rod lock for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.