
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X50-20B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 50mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X50-20B is a double-acting JIS compact cylinder with an external threaded stop and lock nut that limits the extend stroke. You can fine-tune the usable extend range from 30 to 50 mm on the machine, while the retract stroke remains unaffected. It features a 32 mm bore, a 16 mm rod, and a male M14x1.5 rod-end thread for direct load coupling.
The body includes fixed NBR elastomer bumpers at each end for end-of-stroke deceleration and retains magnetic-switch grooves, though this specific configuration ships without a magnet. Operating pressure spans 0.15 to 1.0 MPa, and the PT1/8 port handles standard pneumatic supply.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X50-20B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 50 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on machining fixtures without swapping cylinders when raw material thicknesses vary slightly.
Modify product-changeover stop positions on a conveyor assembly line quickly to accommodate different package widths.
Establish trial end positions on packaging sealing presses to find the optimal compression depth for various carton sizes.
If your application never requires end-position variance, a fixed-stroke ACQ32X50 is simpler and sufficient. When ordering this adjustable unit, verify the 32 mm bore, 50 mm full stroke, 20 mm adjuster window, the male M14x1.5 rod thread, and confirm that no internal magnet is needed for your sensing setup.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The usable extend range is 30-50 mm via a 20 mm adjustment window, the external adjuster thread is M12x1.25, and the port size is PT1/8.
The external threaded stop limits how far the rod extends without changing the piston area, meaning force remains identical to a standard ACQ. The retract stroke is unaffected, and fixed elastomer bumpers decelerate the piston near both ends. Note that this model lacks a sensor magnet, and a plain cylinder will not hold its load on air loss without an external rod lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.