Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X60-10S
The AirTAC Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X60-10S is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 60mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
- BoreØ32 mm
- Full stroke60 mm
- Port sizePT1/8
- Adjuster threadM12×1.25
About the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X60-10S
The AirTAC ACQJ32X60-10S is a double-acting JIS compact cylinder featuring an external extend-stroke adjuster. A threaded stop with a lock nut restricts how far the rod travels outward, yielding a usable extension range of 50 to 60 mm. The return stroke remains fixed at its standard length. Because the piston area stays constant, output force matches a conventional ACQ exactly.
This 32 mm bore unit pushes with 402.1 N at 0.5 MPa and pulls with 301.6 N. It includes a built-in magnet (-S) for reed or solid-state sensing, NBR elastomer bumpers for end-of-stroke deceleration, and an M12x1.25 adjuster thread. Operating pressure spans 0.15 to 1.0 MPa, with a PT1/8 port and a 16 mm rod.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X60-10S Technical Specifications
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X60-10S |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 60 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; the piston area — and therefore the force — is the same as a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Force equals a standard ACQ of the same bore — the adjuster changes stroke length, not piston area. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X60-10S
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Where the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X60-10S Is Used
Machining Fixture Stops
Dial in the exact clamping reach on a CNC milling fixture by turning the external stop, accommodating different raw casting widths without swapping cylinders.
Packaging Changeover
Adjust the extend endpoint on a carton sealing press during product format changes, saving setup time by turning the lock nut instead of reprogramming the PLC.
Prototype Positioning
Establish optimal probe contact distances on a laboratory test rig by tweaking the extend limit in 1 mm increments until the desired sensing pressure is achieved.
Is the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X60-10S the Right Cylinder?
If your application needs less push force, the 25 mm bore delivers 245.4 N at 0.5 MPa, whereas stepping up to a 40 mm bore provides 628.3 N. Choose this adjustable model only if your fixture requires varying the outward end position by up to 10 mm without machining new spacers; otherwise, a fixed-stroke ACQ32X60 is simpler. Confirm the 32 mm bore, 60 mm full stroke, 10 mm window, magnet option, and female M8x1.25 rod thread when ordering.
Quick checklist
- ✓ Need on-machine end-position tuning?
- ✓ Full stroke and adjust window (mm)
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the adjuster nut after setting the stop.
- check The stop limits the EXTEND stroke only.
- check Avoid side load on the short piston rod.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X60-10S FAQ
This 32 mm bore cylinder has a full stroke of 60 mm with a 10 mm adjustable window, giving a usable extend range of 50-60 mm. Force is identical to a standard ACQ: 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. The retract stroke is unaffected.
An external M12x1.25 threaded stop with a lock nut limits the outward extension, changing only the stroke length without altering the piston area or force. Deceleration is handled by fixed NBR elastomer bumpers, not adjustable air cushions. The -S magnet works with both reed and electronic solid-state switches mounted in the cylinder grooves.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQJ Compact Cylinders
Request a Quote for Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X60-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.