
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X60-20S is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 60mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X60-20S is a double-acting JIS compact cylinder featuring an external threaded stop with a lock nut on the rod-end side. This mechanism limits the extend travel, allowing you to fine-tune the end position directly on the machine without swapping parts. With a full stroke of 60 mm and a 20 mm adjustment window, the usable extend range spans 40 to 60 mm, while the retract stroke remains completely unaffected.
The unit includes a fixed NBR elastomer bumper at each end for end-of-stroke deceleration and features a built-in piston magnet (-S) for position sensing. It operates at speeds between 30 and 500 mm/s, utilizing a PT1/8 port and a 16 mm piston rod.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X60-20S |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 60 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping extension on a CNC machining fixture during setup, shortening the stroke from 60 mm down to 40 mm to accommodate varying raw material thicknesses without disassembling the pneumatic line.
Adjust the pusher end-stop on a packaging conveyor when switching between different carton sizes, using the external M12x1.25 adjuster thread to rapidly set the new position without recalibrating the entire machine.
Test various pressing depths on an electronics assembly press by tweaking the extend limit on the fly, ensuring delicate components are seated perfectly before locking the nut and finalizing the cycle.
If your end position never varies, a fixed-stroke ACQ cylinder is sufficient, but for product-changeover flexibility, the ACQJ adjuster is ideal. To order, confirm the 32 mm bore, 60 mm full stroke, 20 mm window, the -S magnet option, and the female M8x1.25 rod-end thread. Note that a plain ACQ-type does not hold its load on air loss; for a fail-safe hold, specify an external rod lock or pilot-operated check valve.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
At 0.5 MPa, the push force is 402.1 N and the pull force is 301.6 N. At 0.7 MPa, the push force is 562.9 N, with a maximum push of 82 kgf at 1.0 MPa. The full stroke is 60 mm with a 20 mm window, meaning the usable extend range is 40 to 60 mm.
An external threaded stop with a lock nut limits the extend travel, allowing on-machine end-position tuning. The adjuster changes the stroke length only, so the force remains identical to a standard ACQ. The cylinder uses a fixed NBR elastomer bumper at each end for deceleration rather than an adjustable air cushion, and the -S magnet works with both reed and electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.