
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X60-50 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 60mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X60-50 is a double-acting JIS compact cylinder featuring an external threaded stop with a lock nut that restricts the extend stroke. You can fine-tune the outward end position on the machine itself without swapping parts, yielding a usable extend span of 10 to 60mm from the 60mm full stroke. The retract movement remains completely unaffected by this adjustment.
The unit integrates fixed elastomer bumpers rather than adjustable air cushions, and the body includes sensor grooves for tracking, though this specific configuration ships without a magnet. Operating pressure spans 0.15 to 1.0MPa, with a PT1/8 port and a 16mm piston rod.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X60-50 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 60 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on a CNC fixture during prototype runs, allowing the rod to extend between 10 and 60mm to accommodate varying part thicknesses without machining new stops.
Adjust the folding arm stroke on a packaging line to match different carton heights, using the external M12x1.25 adjuster to set the precise extend endpoint on the fly.
Regulate product positioning stops on a conveyor during product changeover, fine-tuning the outward stroke while relying on the fixed elastomer bumper to decelerate the load at the end of travel.
When sizing this 32mm bore, dropping to a 25mm option lowers the push force to 245.4N at 0.5MPa, while stepping up to a 40mm bore raises it to 628.3N. If your application never requires altering the extend endpoint, a fixed-stroke ACQ cylinder suffices and simplifies the setup. To order this adjustable variant correctly, confirm the 32mm bore, 60mm full stroke, 50mm window, female M8x1.25 rod thread, and whether you need the S magnet option for electronic or reed switch sensing.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The full stroke is 60mm, but the external adjuster allows you to shorten the extend stroke by up to 50mm, giving a usable extend range of 10 to 60mm.
No, the threaded stop only changes the extend stroke length, not the piston area, so force remains identical to a standard ACQ. This plain cylinder does not hold its load if air is lost; the rod drifts and the fixed NBR bumper only decelerates near stroke end, so add an external rod lock for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.