
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X70-75 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 70mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X70-75 is a double-acting JIS compact cylinder featuring an external extend stop. A threaded M12x1.25 adjuster and lock nut restrict how far the rod travels outward. This permits an on-machine usable extend range of 0 to 70 mm, shortening the 70 mm full stroke by up to 75 mm. The retract distance remains completely unaffected.
The unit relies on a fixed NBR elastomer bumper at each end for end-of-stroke deceleration rather than an adjustable air cushion. Body sensor grooves are present, though this specific configuration ships without a magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X70-75 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 70 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×70 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on a CNC fixture during initial setup, allowing perfect alignment against raw material without machining custom stop spacers.
Adapt the folding stroke rapidly on a packaging line when switching between different carton heights, ensuring the platen meets the new panel size perfectly.
Test and set trial end positions for pressing bearings on an assembly press, tweaking the outward travel limit safely until the desired insertion depth is achieved.
When sizing this 32 mm bore actuator, consider the neighbouring capacities. If your end position never varies, a fixed-stroke ACQ cylinder is simpler and entirely sufficient. To order this adjustable unit correctly, confirm the 32 mm bore, 70 mm full stroke, 75 mm window, female M8x1.25 rod end, and PT1/8 porting.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
It features a 32 mm bore, PT1/8 port, female M8x1.25 rod end, and an M12x1.25 adjuster thread. The usable extend range is 0 to 70 mm via the 75 mm window, while the retract stroke stays fixed.
The external threaded stop physically limits the rod extension distance without altering the piston area, meaning the force remains identical to a standard ACQ. Deceleration is handled solely by a fixed elastomer bumper, not an adjustable air cushion. Note that a plain ACQ body does not hold its load on air loss; for fail-safe holding, use an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.