
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X80-10B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 80mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X80-10B is a double-acting JIS compact cylinder featuring an external M12x1.25 threaded stop with a lock nut to regulate the extend end position. You can fine-tune the outward travel within a 70 to 80 mm window directly on your machinery, while the retract movement remains fixed at the standard 80 mm length.
The unit incorporates a fixed NBR elastomer bumper at each end for basic deceleration and requires no pneumatic cushioning adjustments. This variant includes a male M14x1.5 piston rod end for direct load coupling, operates at 30-500 mm/s, and utilizes a PT1/8 port.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X80-10B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 80 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on a CNC lathe during new product introduction, testing different end positions without machining custom spacers.
Alter the physical extend stroke on a packaging line diverter to accommodate varying carton lengths on the fly, keeping downtime to a minimum.
Iteratively test the engagement depth of a pin insertion press, relying on the lock nut to safely secure the newly tuned 70 mm minimum extend position.
If your setup requires less push power, the 25 mm bore provides 245.4 N @0.5 MPa, whereas stepping up to a 40 mm bore yields 628.3 N @0.5 MPa. If your application never demands end-position adjustments, a fixed-stroke ACQ32X80 will achieve the same output. When ordering this adjustable model, confirm the 32 mm bore, 80 mm full stroke, 10 mm window, the male M14x1.5 rod thread, and note that this specific configuration ships without a magnet.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
This 32 mm bore cylinder has a usable extend range of 70-80 mm.
No, the adjuster only limits stroke length, so output force remains identical to a standard ACQ. The cylinder uses fixed elastomer bumpers for end-of-travel deceleration and will not hold its load if air pressure is lost; use an external rod lock for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.