
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X80-40B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 80mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The ACQJ32X80-40B is a double-acting JIS compact cylinder with an 80mm full stroke and a 40mm external adjustment window. An external M12x1.25 threaded stop with a lock nut lets you set the extend end position anywhere from 40mm up to the full 80mm. The retract stroke remains completely unaffected by this mechanism.
This variant includes a male M14x1.5 piston rod end for direct load coupling and uses PT1/8 ports. The body incorporates fixed NBR elastomer bumpers at both ends for end-of-stroke deceleration rather than adjustable air cushions. While it ships without a magnet, the barrel retains magnetic-switch grooves for adding sensors later. Operating pressure ranges from 0.15 to 1.0 MPa, with a maximum speed of 500 mm/s.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X80-40B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 80 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact extend position for varying raw material thicknesses on a CNC lathe without machining new stop blocks.
Adapt the extend reach on the fly during a packaging line changeover to accommodate different box dimensions.
Safely test and incrementally adjust the extend end position for a press operation before finalizing the mechanical stop distance.
A standard fixed-stroke ACQ32 cylinder is sufficient if your end position never varies, but this ACQJ model is necessary for setups requiring on-the-fly stroke tuning. To order, confirm the 32mm bore, 80mm full stroke, 40mm adjustment window, the male rod thread (-B), and whether you need a magnet (-S) for later sensor integration.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The usable extend range is 40-80mm (80mm full stroke minus the 40mm window). Force is identical to a standard ACQ: push is 402.1N and pull is 301.6N at 0.5 MPa, push is 562.9N at 0.7 MPa, and maximum push is 82kgf at 1.0 MPa.
An external M12x1.25 threaded stop with a lock nut limits the extend distance without changing the piston area, so force remains constant. The cylinder uses fixed NBR elastomer bumpers, not adjustable air cushions. It will not hold a load on air loss; use an external rod lock or pilot-operated check valve for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.