
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X80-50 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 80mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X80-50 is a double-acting JIS compact cylinder featuring an external threaded stop with a lock nut that limits the extend end position. You can fine-tune the usable extend range from 30 up to 80 mm directly on the machine without swapping parts. The retract stroke remains unaffected, and the M12x1.25 adjuster thread allows precise positioning. Because the piston area stays constant, the output force is identical to a standard ACQ of the same bore.
It features a 16 mm piston rod, a PT1/8 port, and a fixed elastomer bumper at each end for end-of-stroke deceleration. The body includes magnetic-switch grooves, though this specific configuration ships without a magnet. Operating pressure spans 0.15-1.0 MPa across a temperature range of -20 to +70 C, with operational speeds between 30-500 mm/s.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X80-50 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 80 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on a CNC milling fixture during prototype runs or when material thickness varies, using the external stop to prevent over-travel without reprogramming the machine cycle.
Adjust the folding arm extension on a packaging line to accommodate different carton heights, ensuring precise flap positioning during rapid product changeovers.
Set trial end positions on an assembly press for pressing bearings, allowing operators to tweak the 30-80 mm extend depth on-site without fabricating new mechanical spacers.
If the extend end position never needs variation, a standard fixed-stroke ACQ32X80 will suffice. To order, confirm the 32 mm bore, 80 mm full stroke, 50 mm adjustable window, female M8x1.25 rod-end thread, and PT1/8 porting. Note that this variant lacks the -S magnet option for solid-state or reed sensors.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The force is identical to a standard ACQ cylinder of this bore: push is 402.1 N and pull is 301.6 N at 0.5 MPa, push is 562.9 N at 0.7 MPa, and max push is 82 kgf at 1.0 MPa. The full stroke is 80 mm with a 50 mm adjustable window, meaning the usable extend range is 30-80 mm.
The external threaded stop uses an M12x1.25 adjuster with a lock nut to mechanically limit how far the rod extends, shortening the extend stroke only. The retract stroke remains completely unaffected. Force is unchanged because the piston area is the same. The cylinder uses a fixed elastomer bumper at each end for deceleration rather than an adjustable air cushion.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.