
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X80-50S is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 80mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X80-50S is a double-acting, double-rod JIS compact cylinder featuring an external extend stop. An M12x1.25 threaded adjuster and lock nut let you fine-tune the forward end position on the machine, yielding a usable extend span of 30 to 80 mm from the 80 mm full stroke. The retract distance remains at the standard 80 mm.
This unit includes a built-in piston magnet (-S) compatible with reed or solid-state sensors via its integrated grooves. It runs on PT1/8 ports, carries a 16 mm rod with an M8x1.25 female thread, and relies on a fixed NBR elastomer bumper at each end for end-of-stroke deceleration rather than an adjustable air cushion. Operating pressure spans 0.15 to 1.0 MPa, with a speed range of 30-500 mm/s.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X80-50S |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 80 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on a CNC fixture during setup. The external stop lets operators shift the extend end position by up to 50 mm without machining new spacers.
Accommodate varying part heights on a conveyor assembly station. Adjust the forward stroke limit on the fly to handle different product families without swapping cylinders.
Set precise flap-folding end positions for varying box sizes on a packaging line. The threaded stop provides repeatable positioning while the fixed bumper absorbs end impacts.
Choosing this 32 mm bore depends on your force and space needs. A standard fixed-stroke ACQ32 is adequate if your extend position never varies. When ordering, confirm the 80 mm full stroke, 50 mm adjuster window, -S magnet, and female M8x1.25 rod end.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The usable extend range is 30 to 80 mm (80 mm full stroke minus a 50 mm window). The retract stroke is unaffected. The external adjuster uses an M12x1.25 thread.
No, the threaded stop only limits the extend length, not the piston area, so force remains identical to a standard ACQ. The cylinder uses a fixed NBR elastomer bumper at each end, not an adjustable air cushion. Note that a plain ACQ does not hold its load on air loss; for fail-safe holding, use an external rod lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.