
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X90-50 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 90mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X90-50 is a double-acting JIS compact cylinder with an external threaded stop and lock nut that limits the extend end position. You can fine-tune the usable extend range from 40 mm up to the full 90 mm directly on the machine without changing parts. The retract stroke remains completely unaffected by this adjustment.
The unit features a 16 mm piston rod, a PT1/8 port, and fixed elastomer bumpers at both ends for end-of-stroke deceleration. The body includes sensor grooves, though this specific configuration ships without a magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X90-50 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 90 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact extend position from 40 to 90 mm on a CNC machining fixture to accommodate raw part tolerances without fabricating new spacer blocks.
Adjust the end stop on a packaging line diverter to handle different carton lengths on the fly, ensuring positive positioning without reprogramming the PLC.
Find the optimal end-of-stroke contact point on a laboratory press by testing various extend positions, relying on the fixed NBR bumper to absorb impact energy.
When sizing this 32 mm bore actuator, consider the next size down and up for your force requirements. If your application requires a fixed extend length that never changes, a standard ACQ cylinder without the external adjuster is sufficient. To order this adjustable model correctly, confirm the 32 mm bore, 90 mm full stroke, 50 mm adjustment window, female rod-end thread M8x1.25, and standard PT port. Note that this unit lacks the -S magnet option.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The usable extend range is 40 to 90 mm, adjustable via the M12x1.25 external stopper thread.
No, the external threaded stop only shortens the extend stroke length, not the piston area, so force remains unchanged. The retract stroke is unaffected. The cylinder uses fixed elastomer bumpers for deceleration rather than adjustable air cushions, and this model ships without a sensor magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.