
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X100-10 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 100mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X100-10 is a double-acting JIS compact cylinder with an external threaded stop and lock nut that limits the extend end position. You get a usable extend range of 90-100mm from the 100mm full stroke, tunable directly on your machinery without swapping components. The retract stroke remains completely unaffected.
It features a 16mm rod, PT1/8 port, and fixed elastomer bumpers at both ends for end-of-stroke deceleration.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X100-10 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 100 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the extend position precisely during CNC fixture setups, allowing 90-100mm travel to accommodate varying raw material thicknesses without disassembling the pneumatic line.
Adjust the pusher end-point on the fly when switching between different packaging blank sizes, ensuring perfect folding pressure without needing custom length rods.
Set trial end positions for pressing bearings or pins, tweaking the stroke by up to 10mm to test insertion depths before finalizing the machine build parameters.
If the end position never varies, a fixed-stroke ACQ cylinder is sufficient. When ordering, confirm the 40mm bore, 100mm full stroke, 10mm window, female M8x1.25 rod thread, and PT1/8 porting.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The usable extend range is 90-100mm, utilizing a 10mm window to shorten the 100mm full stroke.
An external M12x1.25 threaded stop with a lock nut mechanically limits the extend distance, changing the stroke length only. The force remains identical to a standard ACQ because the piston area is unchanged. The cylinder uses fixed elastomer bumpers at both ends for deceleration, not adjustable air cushions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.