
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X100-30B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 100mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X100-30B is a double-acting JIS compact cylinder with an external threaded stop and lock nut that limits the extend stroke. You can fine-tune the end position on the machine without swapping parts, yielding a usable extend range of 70-100 mm (full 100 mm stroke minus up to 30 mm). The retract stroke remains completely unaffected.
This bore 40 model features a PT1/8 port, a 16 mm rod, fixed NBR elastomer bumpers at both ends for end-of-stroke deceleration, and a male M14x1.5 rod-end thread (-B) that couples directly to your load. The body includes sensor grooves, though this specific unit ships without a magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X100-30B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 100 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact 70-100 mm extend position for varying part heights on a CNC machining fixture without fabricating new spacer rings.
Quickly reposition the extend end stop to accommodate different carton widths on a packaging line changeover using the external M12x1.25 adjuster.
Test trial end positions on a prototype press, tweaking the stroke depth in millimeters to find the optimal forming distance before locking the nut.
If your application requires a fixed 100 mm extend depth with no on-machine variability, a standard ACQ cylinder will suffice. For this adjustable version, confirm your ordering essentials: 40 mm bore, 100 mm full stroke, 30 mm adjuster window, male M14x1.5 rod thread (-B), and no magnet. Note that a plain cylinder does not hold its load on air loss; for a fail-safe hold, specify an external rod lock or pilot-operated check valve.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The usable extend range is 70-100 mm (100 mm full stroke minus a 30 mm window).
An external M12x1.25 threaded stop with a lock nut limits the extend stroke length only; it does not change piston area, so force remains unchanged. The retract stroke is unaffected. Deceleration is handled by fixed NBR elastomer bumpers at each end, not adjustable air cushions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.