
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X100-40 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 100mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X100-40 is a double-acting JIS compact cylinder with an external threaded stop and lock nut that limits the extend end position. You can fine-tune the usable extend range from 60 mm up to the full 100 mm directly on your machine without swapping parts. The retract stroke remains completely unaffected by this mechanism.
It features a 16 mm piston rod, an M8x1.25 female rod-end thread, and a PT1/8 port. The body incorporates fixed elastomer bumpers at both ends and includes magnetic-switch grooves, though this specific configuration ships without a magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X100-40 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 100 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping extension on a CNC machining fixture to accommodate varying raw part sizes without manufacturing new stop collars.
Rapidly adapt the extend end position on packaging equipment during format changes, utilizing the M12x1.25 adjuster to set the new stroke limit.
Establish precise trial end positions for pressing sub-components, allowing operators to tweak the 60-100 mm range on the line to perfect the insertion depth.
If your application never requires end-position adjustments, a fixed-stroke ACQ40X100 will suffice and saves setup time. For ordering, confirm the 40 mm bore, 100 mm full stroke, 40 mm adjuster window, female rod thread, and whether you need the -S magnet option for sensors.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The usable extend range is 60-100 mm (a 100 mm full stroke minus up to a 40 mm window). The retract stroke remains the full 100 mm.
No, the adjuster changes the stroke length only, so the force is identical to a standard ACQ40 cylinder. The unit uses fixed NBR elastomer bumpers at each end for deceleration rather than adjustable air cushions. Note that this model ships without a magnet, though the body retains sensor grooves for adding reed or solid-state switches if needed.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.