
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X100-40S is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 100mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X100-40S is a double-acting JIS compact cylinder with a 40mm bore and a 100mm full stroke. An external M12x1.25 threaded stop and lock nut limit the extend end position, providing a usable forward range of 60-100mm. You can fine-tune the forward endpoint directly on the machine without swapping parts, while the retract stroke remains unaffected.
Because the adjuster only changes travel length and not piston area, output force stays identical to a standard ACQ of this size. The body uses fixed NBR elastomer bumpers at each end for end-of-travel deceleration, and the included -S piston magnet works with reed or solid-state sensors via the integrated grooves.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X100-40S |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 100 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on a CNC machining center during part changeovers, shortening the forward stroke from 100mm down to 60mm to accommodate varying blank sizes.
Adjust the pusher endpoint on the fly for different packaging carton depths without changing out the cylinder or adding spacer blocks to the assembly.
Set precise trial end positions for pressing bearings or pins, ensuring the rod travels exactly the required distance before hitting the internal bumper.
Choose this 40mm model when your setup requires roughly 628N of forward force and on-the-fly endpoint adjustments within the 60-100mm window. If your application never requires stroke changes, a fixed standard ACQ cylinder will suffice. Confirm your ordering essentials: 40mm bore, 100mm full stroke, 40mm adjuster window, -S magnet, and the default female M8x1.25 rod-end thread with PT1/8 port.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The full stroke is 100mm, but the external stop allows you to adjust the usable extend range from 60mm to 100mm.
No, the adjuster only limits how far the rod extends, so force remains identical to a standard ACQ. Deceleration is handled by fixed NBR elastomer bumpers at both ends, not an adjustable air cushion. The -S magnet also allows you to mount reed or electronic solid-state switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.