
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X15-10 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 15mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X15-10 is a double-acting JIS compact cylinder with a 15mm full stroke and a 10mm adjustable extend window. An external M12x1.25 threaded stop and lock nut lets you set the extend end position anywhere from 5 to 15mm without swapping parts. The retract stroke remains completely unaffected.
The 40mm bore uses a PT1/8 port and a 16mm rod. Deceleration relies on a fixed NBR elastomer bumper at each end rather than an adjustable air cushion.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X15-10 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 15 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×15 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact 5-15mm extend position for varying raw material blanks on a CNC lathe without machining new spacer blocks.
Rapidly reposition locating pins on a packaging line by turning the external stop screw when switching carton sizes.
Safely trial different extend endpoints during assembly machine development before locking the lock nut at the optimal distance.
A fixed-stroke ACQ is adequate if your end position never varies. This SKU ships without a magnet; order the -S option if you require reed or solid-state switch sensing. Confirm the female M8x1.25 rod-end thread suits your mounting.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
It has a 40mm bore, 15mm full stroke, and a 10mm adjustment window, giving a usable extend range of 5-15mm.
An external M12x1.25 threaded stop with a lock nut limits the extend travel; retract is unaffected. The piston area is unchanged, so force remains identical. Fixed NBR bumpers handle end deceleration. Note that this cylinder will not hold a load on air loss; use an external rod lock or pilot-operated check valve for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.