
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X150-20 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 150mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X150-20 is a double-acting, JIS compact cylinder featuring an external threaded stop and lock nut that limits the extend end position. You can fine-tune the usable extend range from 130 mm up to the full 150 mm stroke directly on the machine, while the retract stroke remains completely unaffected. Because the piston area stays constant, output force equals a standard ACQ of this bore.
It features a 16 mm piston rod, a PT1/8 port, and fixed elastomer bumpers at both ends for end-of-stroke deceleration. As a long-stroke made-to-order variant exceeding the 100 mm standard maximum, it provides extra reach while retaining the compact body profile.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X150-20 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 150 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact extend position during product-changeover on CNC machining fixtures without swapping out cylinder hardware.
Apply precise clamping force across a wider 150 mm gap, using the external stop to compensate for varying material thicknesses.
Set trial end positions for packaging folding arms, ensuring crisp carton seals by tweaking the 130-150 mm extend range on-site.
If you need less push force, the adjacent 32 mm bore yields 402.1 N at 0.5 MPa, whereas stepping up to the 50 mm bore provides 981.8 N. A fixed-stroke ACQ40 is sufficient if your end position never varies. When ordering this adjustable model, confirm the 40 mm bore, 150 mm full stroke, 20 mm adjuster window, female rod-end thread, and whether you require a magnet for sensor tracks.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The usable extend range is 130-150 mm (150 mm full stroke minus up to 20 mm).
The external M12x1.25 threaded stop with a lock nut limits how far the rod extends, shortening the stroke length only. The force remains identical to a standard ACQ because the piston area is unchanged, and fixed elastomer bumpers handle end-of-stroke deceleration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.