verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACQJ Series · JIS Compact Adjustable-Stroke Cylinder

Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X150-30B

The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X150-30B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 150mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.

  • BoreØ40 mm
  • Full stroke150 mm
  • Port sizePT1/8
  • Adjuster threadM12×1.25
$97.67 $105.17Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACQJ40 stroke, mounting and version on one page All ACQJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X150-30B

The ACQJ40X150-30B is a double-acting JIS compact cylinder featuring a 150mm stroke and a male M14x1.5 piston rod. This long-stroke made-to-order variant exceeds the standard 100mm maximum for bore 40, utilizing the extended range up to 300mm. An external M12x1.25 threaded stop with a lock nut lets you fine-tune the extend end position on the machine without swapping parts. The usable extend range spans 120mm to 150mm, while the retract stroke remains completely unaffected.

Because the adjuster only limits travel, the piston area stays the same, meaning force is identical to a standard ACQ. The body uses a PT1/8 port and fixed NBR elastomer bumpers at both ends rather than adjustable air cushions. While it lacks a sensor magnet, the integrated grooves remain ready for reed or solid-state switches if needed later.

Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X150-30B Technical Specifications

ModelAirtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X150-30B
SeriesACQJ JIS compact adjustable-stroke cylinder
Bore sizeØ40 mm
Full stroke150 mm
Adjuster threadM12×1.25
Port sizePT1/8
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
Rod threadM8×1.25 (F) / M14×1.5 (B)

Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.

Model Code: Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X150-30B

ACQJJIS compact double-acting ADJUSTABLE-STROKE cylinder series.
40Bore size in mm.
×150Full stroke length in mm.
-0Adjustable window in mm (extend stroke can be shortened by up to this).
S / BMagnet (S) / male-thread rod (B); omit for none / female thread.

Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).

Where the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X150-30B Is Used

precision_manufacturing

Machining Fixture Stops

Dial in the extend position precisely on a CNC lathe loader to accommodate raw stock of varying lengths without fabricating custom hard stops.

factory

Product Changeover Diverters

Quickly reposition the extend endpoint on a packaging line guide rail when switching between different carton sizes, minimizing line downtime.

engineering

Prototype Assembly Probes

Iteratively test and set the exact extension depth for a pressing operation during R&D trials before finalizing a fixed mechanical stop.

Is the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X150-30B the Right Cylinder?

When sizing this actuator, consider the 40mm bore against its neighbors. If your extend endpoint never varies, a fixed-stroke ACQ cylinder is simpler and avoids the adjuster overhang. For this configuration, confirm the 150mm length, 30mm window, male M14x1.5 rod, and the lack of a magnet. Note that a plain compact cylinder drifts if air pressure is lost; utilize an external rod lock or pilot-operated check valve for fail-safe load holding.

AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine end-position tuning?
  • ✓ Full stroke and adjust window (mm)
  • ✓ Force at your working pressure
  • ✓ Magnet (S) for sensors?
  • ✓ Female (blank) or male (B) rod thread
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the adjuster nut after setting the stop.
  • check The stop limits the EXTEND stroke only.
  • check Avoid side load on the short piston rod.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X150-30B FAQ

The full stroke is 150mm, and with the 30mm window, the usable extend range is 120mm to 150mm.

The M12x1.25 threaded stop with lock nut limits the extend travel without changing the piston area, so force remains identical to a standard ACQ. Deceleration relies on fixed NBR elastomer bumpers at each end, not an adjustable air cushion. The retract stroke is unaffected by the extend adjuster.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC ACQJ Compact Cylinders

Request a Quote for Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X150-30B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACQJ40X150-30B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.