
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X150-40S is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 150mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The ACQJ40X150-40S is a double-acting JIS compact cylinder with a 40mm bore and a 150mm full stroke. An external threaded stopper with a lock nut permits on-the-fly extend end-position tuning, yielding a usable forward travel range of 110 to 150mm. The retract movement remains fixed at its standard length. Because the piston area is unaltered, output force equals that of a conventional ACQ unit.
This unit includes a built-in piston magnet (-S) compatible with reed or solid-state switches. It features a 16mm rod, an M8x1.25 female rod-end thread, and PT1/8 ports. A fixed NBR elastomer bumper decelerates motion at both extremes. Since 150mm exceeds the 100mm standard maximum, this is a long-stroke made-to-order variant.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X150-40S |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 150 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Adjust the external stopper to quickly set new forward positions during packaging line format changes without machining new spacers.
Dial in the exact 110-150mm forward travel during R&D testing on a custom assembly rig before finalizing fixed dimensions.
If your equipment never requires end-point shifting, a fixed-stroke ACQ will suffice. To order, confirm the 40mm bore, 150mm full stroke, 40mm adjuster window, the -S magnet, and the M8x1.25 female rod thread.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The full stroke is 150mm, with a 40mm window allowing an adjustable extend range of 110-150mm; retract is unaffected.
The M12x1.25 external threaded stop with lock nut limits forward travel length only, leaving output force unchanged. Deceleration relies on a fixed NBR elastomer bumper at each end. Note that a plain ACQ cylinder will drift on air loss; for fail-safe holding, add an external rod lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.