
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X200-30 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 200mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The ACQJ40X200-30 is a double-acting, double-rod JIS compact cylinder engineered for on-machine extend stroke adjustment. An external M12x1.25 threaded stop with a lock nut permits you to shorten the forward travel by up to 30 mm. This yields a usable extend span of 170 to 200 mm, while the retract stroke remains totally unaffected.
This specific 200 mm configuration is a long-stroke, made-to-order variant exceeding the 100 mm standard maximum for this bore size. It retains the fixed NBR elastomer bumpers and sensor grooves, though this unit ships without a magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X200-30 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 200 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×200 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact extend position for varying part lengths on a CNC milling fixture without machining custom spacers.
Adjust the extend reach of a pneumatic sorting gate to accommodate different package widths on a packaging line.
Set trial end positions on an assembly press to test engagement depths before finalizing a hard mechanical stop.
If your setup never requires altering the end position, a fixed-stroke ACQ cylinder will suffice and avoids the extra adjuster hardware. For ordering, confirm the 40 mm bore, 200 mm full stroke, 30 mm window, female M8x1.25 rod-end thread, and PT1/8 porting.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The usable extend range is 170-200 mm (full 200 mm stroke minus the 30 mm window).
The external M12x1.25 threaded stop with lock nut only limits how far the rod extends; it does not alter piston area, so thrust remains unchanged. Deceleration relies on fixed NBR elastomer bumpers at both ends, not adjustable air cushions. Note that this model ships without a magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.