
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X200-30B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 200mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X200-30B is a double-acting JIS compact cylinder built for long-stroke, made-to-order applications requiring precise extend-end positioning. An external M12x1.25 threaded stop and lock nut lets you fine-tune the extend stroke from 170 mm up to the full 200 mm directly on the machine, while the retract stroke remains completely unaffected. This 200 mm stroke exceeds the standard 100 mm maximum for this bore, falling into the extended long-stroke range.
The unit features a male M14x1.5 rod-end thread for direct load coupling, a fixed NBR elastomer bumper at each end for end-of-stroke deceleration, and a PT1/8 port. Note that this specific configuration ships without a magnet, though the body retains magnetic-switch grooves for optional sensor installation.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X200-30B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 200 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×200 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact extend position from 170 to 200 mm during product-changeover on CNC machining fixtures without machining new stop blocks.
Set trial end positions on automated assembly presses, safely testing engagement depths before locking the M12x1.25 adjuster nut into place.
If your process never requires altering the extend end position, a fixed-stroke standard ACQ cylinder will suffice and avoid the adjuster overhang. For ordering, confirm the 40 mm bore, 200 mm full stroke, 30 mm adjustable window, the male M14x1.5 rod thread (-B), and that no magnet is required. Keep in mind a plain ACQ-type cylinder does not hold its load on air loss; for fail-safe holding, specify an external rod lock or pilot-operated check valve.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The usable extend range is 170-200 mm (200 mm full stroke minus the 30 mm window). The retract stroke is unaffected.
An external M12x1.25 threaded stop with a lock nut limits the extend travel, changing only the stroke length and not the piston area, so force is unchanged. This specific model (-B) ships without a sensor magnet, though the body retains sensor grooves. It uses a fixed NBR bumper, not an adjustable air cushion.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.